Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2. Select Obtain an IP address automatically on the PC that is connected to the
LAN port of the IAD. The IAD then allocates a LAN IP address to the PC, such as
192.168.100.10.
To access network by the preceding method, ensure that the IAD is in the NAT (Network
Address Translation) mode. Run display nat in the global configuration mode to check that
whether the IAD is in the NAT mode. If the CLI does not display that NAT is started,
run nat enable to enter the NAT mode.
To Next Page
Loading...
