2
Human Safety
1. Before performing any operation, carefully read this document.
2. To prevent electric shocks, get tools insulated and wear insulation gloves when connecting cables.
3. To prevent personal injury, wear protective shoes when moving batteries.
4. In case of fire, use a dry power fire extinguisher to put out the fire. Using a fluid fire extinguisher
may cause electric shocks.
5. Do not touch uninsulated battery terminals. Otherwise, electric shocks may occur.
6. Using incorrect battery models may cause explosion. Dispose of used batteries by following the
instructions.
7. Cut off power supply and remove all metal objects such as watches and rings before maintenance.
8. Do not move the battery pack by holding its mounting brackets, front panel, or terminal cover.
Because the battery pack is heavy, several persons are required to move it in compliance with
safety regulations.
< 18 kg (< 40 lb) 18–32 kg (40–70 lb) 32–55 kg (70–120 lb) > 55 kg (> 120 lb)
2
Appearance
ESS-240V12-(9AhBPVBA,
7AhBPVBA) appearance
ESS-240V12-(9AhBPVBA,
7AhBPVBA) rear panel
DC port 1
DC port 2
Battery temperature sensor
cable hole
Battery pack Weight Dimensions (H x W x D)
ESS-240V12-7AhBPVBA01 61 kg
130 mm x 430 mm x 685 mm
ESS-240V12-7AhBPVBA02 51 kg
ESS-240V12-9AhBPVBA01 69 kg
ESS-240V12-9AhBPVBA02 65 kg
To Next Page
Loading...
