Facsimile Function
10
Dialing Up to the Internet
Select a connection or create a new connection.
Then Click Connect.
If the user name and password
are correct, you can connect to the Internet.
Note
The connection rate shown after the dial-up is
connected may be the connection rate of the
data port. For details, consult your carrier.
Facsimile Function
Note
• The function requires the network support.
The success rate of sending or receiving is
related to the performance of the network.
• When using the facsimile function, do not use
other services.
• Here, only the brief introduction of using the
facsimile set is provided. For detailed options,
refer to the instructions of relevant facsimile
sets.
• In certain network conditions, the FWT sup-
ports the voice to facsimile function, that is,
you can operate in normal mode to send or
receive a facsimile. For details, consult your
carrier.
Sending a Facsimile
Dial the number, with ##0 before the number and *
after the number. After hearing "toot", press send but
-
ton.
It is recommended that the called party configure the
auto-receive mode.
Receiving a Facsimile
1 Dial ##36* and after the "toot", the FWT is in fac-
simile receive mode.
2 Exit from facsimile receive mode:
• Dial ##30* and wait the sound of "toot".
• Restart the FWT.
Note
You can make a call or send a fax when the
FWT is in facsimile receive mode, but you can
-
not answer a call.
To Next Page
Loading...
