Mounting the FWT
6
The required signal strength is level 1 or above.
Note
If the signal strength is in level 1 or 2, the signal
strength indicators of level 1 or 2 should be on
for 80 percent of the time.
Mounting the FWT
Horizontal Mounting
Place the FWT on a smooth surface with cool air and
good ventilation. Keep the FWT away from other
objects around for at least 10 cm.
Vertical Mounting
Fix two wall screws into the wall with the screw heads
extending approximately 3 mm from the surface of
the wall, align the mounting brackets with the screws,
push the host towards the wall, and mate the brack
-
ets with the screws, ensuring the host is stable.
Number of Idi-
cators Are On
Signal
Level
Signal Strength
0 0 Poor
1 1 OK
2 2
Good
To Next Page
Loading...
