17
Auto dial
If the function is activated, the number you key in is dialled automatically at the
time you set.
Network
You can change the settings for the network. Select Settings > Network
this will allow configuration of UMTS, GSM or Auto Mode, (we would also
recommend Auto), and to select the network you are connected to, (this feature
is only relevant if you take the device abroad and roam into a foreign network,
the device will connect automatically, but this feature allows you to override the
automatic selection).
Security
You can change the settings related to the device security. Select Settings >
Security, and then select the following security setting items.
Reset
This option is used to reset user configurations of the device settings to the
factory settings.
Password lock
This option is used to enable or disable Phone lock and PIN lock.
Change password
Select Security > Change password.
• Select one item.
• Enter the old password (The initial phone password is 0000.)
• Enter a new password.
• Enter the new password again to confirm.
V5102C00310-One Net Desk Phone Guide-EH-V7.indd 17 25/04/2012 15:47
To Next Page
Loading...
