select your preferred watch face, and install it. Your device will automatically switch to the
selected watch face once it is installed. Alternatively, touch a watch face that you have
installed, then touch Set as default to switch to it.
Deleting a watch face
Open the Huawei Health app, go to the device details screen, touch Watch faces, and go to
More > Me > Edit, touch the Cross icon in the upper right corner of a watch face to delete it.
Setting custom cards
To add custom cards
1 HUAWEI WATCH FIT/HUAWEI WATCH FIT new/HUAWEI WATCH FIT mini: Go to Settings
> Display > Favourites.
HUAWEI WATCH FIT Special Edition: Go to Settings > Custom cards.
2 Touch and select the cards you would like to display, such as Sleep, Stress, and Heart
rate. The cards you see on your device may be dierent.
3 To view custom cards after adding them, swipe left or right on the home screen.
To move/delete cards
• To move an added card, touch
next to the card.
• To delete an added card, touch or x next to the card.
Setting Do Not Disturb
If you are using HUAWEI WATCH FIT Special Edition, perform the following operations to
set this mode.
When Do Not Disturb is enabled, your device won't vibrate when receiving incoming calls and
notications. It will still vibrate if you have set any alarms.
Enabling or disabling Do Not Disturb
Method 1: Swipe down from the top of the watch face and touch to enable or disable
it.
Method 2: Enter the device's app list, and go to Settings > Do Not Disturb > All day to
enable or disable it.
Scheduling Do Not Disturb
• To schedule Do Not Disturb:
Enter the device's app list, go to Settings > Do Not Disturb to access the Do Not Disturb
settings screen. Then, enable Scheduled, and set your preferred start and end times.
• To disable scheduled Do Not Disturb:
Getting Started
4
To Next Page
Loading...
Need help?
General
