FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
4 Processing the Optical Fiber
Copyright © Huawei Technologies Co., Ltd.
Step 5 Insert the optical cable whose coating is stripped into the slot on the side marked with
"Remove fixed length coating". Do not leave a gap between the optical cable and the
fixed-length limiting surface.
When inserting the optical cable into the slot, pay attention to the direction of the optical
cable.
1.2 mm x 1.6 mm transparent optical cable, horizontally placed
2 mm x 1.6 mm transparent optical cable, horizontally placed
2 mm x 1.6 mm terminal flexible optical cable, horizontally placed
2 mm x 3 mm terminal flexible optical cable, vertically placed
Step 6 Unlock the fiber cutter, push out the knife edge through the slider at the bottom of the fiber
cutter, and open the case for storing the cut fiber.
To Next Page
Loading...
