Huawei FusionDC1000A Quick Guide

Procedure: Use a Phillips screwdriver to remove the tapping screws (GB15856_1-2002_ST4_8X16) from the bottom sealing
plates of the container (internal and external) in sequence, and then remove the sealing plates.
Note: There are 4 places outside the container and 1 place inside the container. Remove all of them before wiring.
No.S001 Container Bottom Sealing Plate Removal Position Diagram
Removing eight
tapping screws from
the sealing plate

Huawei FusionDC1000A Specifications

General

Brand	Huawei
Model	FusionDC1000A
Category	Storage
Language	English