Huawei FusionDC1000A - Integrated UPS

Default Value Value Range Setting Remarks
/ / 400
IP address 192.168.0.10
1.0.0.0–
223.255.255.255
Default value
Subnet mask 255.255.255.0
0.0.0.0–
255.255.255.255
Default value
Gateway 192.168.0.1
1.0.0.0–
223.255.255.255
Default value
MAC address / / /
Address 1 1–254 Default value
Baud rate 9600
9600, 19200,
115200
Default value
Parity mode None None, Odd, Even Default value
Stop bit 1 1–2 Default value
Enable Disable, Enable Default value
Start address 32 32–44 Default value
Quantity 0 0–4 Default value
Start address 16 16–28 Default value
Quantity 0 0–4 Default value
Start address 112 - Default value
Quantity 0 0–12 Default value
SSID
UPS_WIFI+Last six
characters of
the MAC
address
- Default value
Password Changeme - Default value
Enable Disable, Enable Default value
80 - Default value
Communication
Settings
SSH settings
SmartLi start address
Component UPS5000E-A1
UPS5000-E-(350 kVA–800 kVA) Initial Configuration Parameters
Setting
ModbusTCP Setting
Ambient temperature and
humidity sensor
IP settings
RS485 Setting
WIFI Setting
Advanced Param.
Category Parameter
Battery temperature sensor
BMU
System capacity