Huawei FusionDC1000A - Page 38

Default Value Value Range Setting Remarks
Category Parameter
Single Single, Parallel Default value
/ / 16
0 0–19 0
Normal mode
Normal mode
ECO mode, Self-aging
mode, Converter mode
Normal mode
±5%
±5%, ±6%,
±7%, ±8%,
±5%
Non-BSC BSC mode, Non-BSC Non-BSC
≤ 1000
≤ 1000,
1000–2000,
2000–3000,
3000–4000,
4000–5000
Default value
Disable Enable/Disable Disable
0 0–365 0
The default value depends on the
module and varies with the
number of power modules.
1–5 power modules: 2.0
6-10 power modules: 1.0
10-20 power modules: 0.5
0.5–120.0 1
5 2–120 5
Disable Enable/Disable Disable
Enable Enable/Disable Enable
Disable Enable/Disable Disable
Depends on the actual
model.
0kVA–
5000kVA
/
0 0%–100% 0
Disable Enable/Disable Disable
200% 50%–200% 200%
Input cur.limiting ratio(%)
D.G. charger power ratio(%)
Input cur. limiting
D.G. mode
D.G. power limiting (kVA)
Altitude (m)
NTC
No power supply
BCB tripping
Intra-rack power mode
Block start delay
(s)
Inter-rack power mode
Block start delay
Single/Parallel
System Settings
Requisite modules
Redundant
modules
Top outlet fan
Setting
Working Mode
ECO voltage range
Input Settings
Dust-proof maintenance period (d)
BSC mode