1 WPS Starts the WPS negotiation.
2 WLAN Enables or disables the WLAN function.
3 On/Off Powers the HG532s on or off.
4 Reset Restores the HG532s to its default settings.
To restore the HG532s to its default settings,
press and hold the Reset button for over 6
seconds. After the HG532s is restored to its
default settings, all user customized data will be
lost. Use this function only when necessary.
5 Power Power port used to connect to the power adapter.
6 USB
USB port used to connect a USB device, such as
a USB storage device, a printer or a USB modem.
The maximum voltage/current output from the
USB port is 5 V/0.8 A. That is, the input
voltage/current of the USB device connected to
the USB port cannot exceed 5 V/0.8 A.
Otherwise, the HG532s may not work correctly.
7 ~ 10 LAN4 ~ LAN1
Ethernet ports used to connect to devices such as
a computer, telephone, set-top box, and switch.
11 ADSL
DSL port used to connect to the splitter or
telephone wall jack.
To Next Page
Loading...
