4
2 Hardware Installation
Selecting an Installation Location
Place the HG552e on a well-ventilated even surface without exposure to direct sunlight. For the best
possible performance, take note of the following:
> Make sure there are no obstacles, such as concrete or wooden walls, between the computer
and HG552e.
> Ensure that the computer and HG552e are far from electric appliances that generate strong
magnetic or electric fields, such as microwave ovens.
Connecting Cables
If you have subscribed to digital subscriber line (DSL) broadband, you can connect the HG552e to a
telephone port for Internet access.
Follow the steps in the following figure to connect devices properly.
When configuring the HG552e for the first time, use an Ethernet cable to connect the HG552e
to a computer.
1 Telephone wall jack 2 Splitter 3 Telephone
4 Computer 5 Set-top box 6 HG552e
7 Power adapter
a MODEM port b PHONE port c LINE port
To Next Page
Loading...
Need help?
General
