5
Powering On
To power on the HG552e, press its power button.
After the HG552e is powered on, the HG552e indicator turns on. The following table lists how the
indicators behave when the HG552e is operating correctly. If the indicators do not behave as expected,
ensure that everything is plugged in correctly.
Indicator Expected State
Power Steady on
ADSL
Steady on or blinking
The blinking may last from 40 seconds to 3 minutes. When the indicator
stops blinking and remains on, the HG552e is working correctly.
Internet off (The HG552e is in bridge mode.)
WLAN Steady on or blinking
LAN1 ～ LAN4
Steady on or blinking (indicator of the connected LAN port)
To Next Page
Loading...
Need help?
General
