Huawei IdeaShare - Configuring the Trustlist

2.3 Conguring the Trustlist
The endpoint supports the trustlist function. After this function is enabled, only
IdeaShare clients whose IP addresses are in the trustlist and that are connected to
the hotspot can connect to the endpoint.
To enable the trustlist, perform the following steps:
Step 1 Enable Allow projection from hotspot only or Wi-Fi connection only.
Open the browser of the endpoint or computer, log in to the web interface (refer
to
Quick Conguration or Conguration Guide for the login process), choose
Application > Wireless Projection > Parameter Conguration, and enable
Allow projection from hotspot only or Wi-Fi connection only.
Step 2 Click Enable for the Trustlist function. Then you can add or delete a trustlist
record.
----End
IdeaShare
User Guide 2 Conguration Operations
Issue 01 (2023-03-30) Copyright © Huawei Technologies Co., Ltd. 6