Figure 3-7 Install the Front Cover
Step 11 Tear off the protection film softly to complete the installation.
NOTE
l Do not tear off the protection film until the installation is completed.
l Do not touch the inner face of the bubble with your hands.
----End
3.3 Pendant Mounting
Step 1 Install the bracket to the ceiling with the supplied screws in the ceiling bracket package.
NOTE
Use a plier to remove the removable part and route the cables via side outlet (See pendant installation) if
no cable hole is drilled in Step1, and connect the corresponding cables.
Step 2 Fix the adapter plate to the ceiling bracket with the supplied PM4X8 screws.
IPC6332-MIR
Quick Start Guide 3 Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
To Next Page
Loading...
