2 Installing the Housing of a Box IPC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 2-2 Installing the box IPC onto the installation plate
Box IPC
Installation plate
Step 3 Open the locking knob at the back of the housing. Fix the assembled IPC and installation plate
into the shield. It is recommended that the lens be 3 mm away from the glass mirror inside the
shield after the IPC focus is adjusted. Then, use the screws on the shield to fix the installation
plate of the IPC onto the IPC, as shown in Figure 2-3.
Figure 2-3 Installing the IPC and installation plate inside the housing
To Next Page
Loading...