4 Installing an Infrared Waterproof Tube-Type IPC II
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 4-6 Adjusting the IPC
Step 7 Adjust the position of the IPC based on the arrows marked on the installation drawing. Align
the installation holes at the bottom of the IPC with the screw holes on the mounting base, as
shown in Figure 4-7.
Figure 4-7 Aligning the screw holes
Step 8 Take out the four hexagon screws and L-Wrench. Use the L-wrench to fix the IPC on the
mounting base, as shown in Figure 4-8.
To Next Page
Loading...