4 Installing an Infrared Waterproof Tube-Type IPC II
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 4-8 Fixing the IPC
Step 9 Use the L-Wrench to loosen screws 1 to 3, as shown in Figure 4-9.
To rotate the mounting base of the IPC for 360
o
, loosen screw 1.
To rotate the IPC for 90
o
on the axis, loosen screw 2.
To rotate the front placket of the IPC for 360
o
, loosen screw 3.
Step 10 Adjust the angle of the IPC so that the IPC faces the monitored area, as shown in Figure 4-10,
Figure 4-11, and Figure 4-12.
Figure 4-9 Loosening screws
To Next Page
Loading...