7 Installing a Day & Night High Speed Dome IPC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Do not touch the inside and outside of the dome directly with hands or other objects. Otherwise, the
video quality is affected.
Step 2 Remove the three fastening screws and the flange of the high-speed dome IPC, as show in
Figure 7-11.
Figure 7-11 Removing the flange of the high-speed dome IPC
Step 3 Put the main body of the IPC into the embedded bracket and fasten the main body using three
screws, as shown in Figure 7-12.
Figure 7-12 Fixing the main body of the high-speed dome IPC onto the bracket
Step 4 Cut a hole with a diameter of 240 mm on the suspended ceiling. The diameter error is 2 mm.
To Next Page
Loading...
