Huawei IPE Series

To Next Page

To Previous Page

IPE

Installation Guide

7 Installing a Day & Night High Speed Dome IPC

Issue 03 (2013-02-28)

Huawei Proprietary and Confidential

Figure 7-13 Cutting a hole on the suspended ceiling

Suspended ceiling

Hole with a diameter of 240mm

Step 5 Put the high-speed dome IPC and the embedded bracket in the middle of the hole on the

suspended ceiling, and lock the three retainers, as shown in Figure 7-14.

Figure 7-14 Fixing the bracket onto the suspended ceiling

NOTE

Use a screwdriver to fasten the screws and the retainers will automatically turn outward and press tightly

against the ceiling. In this way, the bracket is fixed onto the ceiling.

Step 6 Mount the plastic decorative cover onto the main body of the IPC. Rotate the cover clockwise

to fix it onto the bracket, as shown in Figure 7-15.

Figure 7-15 Installing the plastic decorative cover

----End

Huawei IPE Series - Page 83