Indicator State Description
O None of the four GE ports are connected with a
network cable.
WLAN Steady blue Wi-Fi is enabled.
Blinking blue WPS pairing is in progress.
O Wi-Fi is disabled (enabled by default).
Ports and Buttons
No. K562e Description
1 Network
ports
The port is auto-negotiated to a LAN port when connected
to a computer or STB, and to a WAN port when connected
to the LAN port of an Internet gateway.
2 Reset
button
When the K562e is starting, use a needle-shaped object to
press and hold this button for more than 2 seconds until all
indicators turn o. After the device restarts and the Power
indicator turns on, the factory settings are restored.
NOTE
Exercise caution when pressing the button. If you cannot access the
Internet after the device is restored to factory settings, contact your
service provider for help.
3 Power Connects to the power adapter.
4 WPS Enables the WPS pairing function.
K562e
Quick Start-02 1 Product Overview
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 2
To Next Page
Loading...
