To reset the Z-Wave network, perform the following steps:
8. Resetting the Z-Wave Network(Operator only)
Step 1 In the IoT platform window, click Assets. Click Name of the gateway for which the
Z-Wave network is to be reset. For details, see section " Operation Guide ".
Step 2 Click RESET to reset the Z-Wave network.
To add the gateway to another network, perform the following steps:
Step 1 Reference product manual of the gateway in another network, and open the
Discovery Mode of the gateway in another network.
Step 2 Enable Learn Mode for the gateway. For details, see section " Operation Guide ".
After the gateway is connected to the network, the following information is
displayed.
7. Adding the Gateway to Another Network(Operator only)
Terms
Z-Wave Term Huawei Term
inclusion add
inclusion discovery
exclusion remove
replication copy
DUT/hub/gateway gateway
BOM : 31507632
Number : 01
11
To Next Page
Loading...
