Huawei LS1015 - Terms

To delete a sensor, perform the following steps:
2. Deleting a Sensor
Step 1 On the device management page, touch the sensor to be deleted.
Step 2 On the device details page, touch the menu on the upper right.
Step 3 In the displayed menu, touch Delete.
Step 4 Delete the sensor as prompted. After each operation is complete, touch Next to go
to the next page. The SmartHome app provides different pages for deleting different
types of sensors.
Step 5 The sensor is deleted successfully.
3. Gateway Replication
Add the gateway to another network. For details, see section " Operation Guide ".
To replicate a gateway, perform the following steps:
To congure the gateway to work in learn mode, perform the following steps:
4. Setting the Gateway in Learn Mode(Operator only)
Step 1 Log in to the IoT platform with the user name and password specied.
Step 2 After login, click Assets. Click Name of the gateway for which Learn Mode to be
enabled
Step 3 On the Details page, select OPEN for Set Learn Mode.
To congure the gateway to work in discovery mode, perform the following steps:
5. Setting the Gateway in Discovery Mode(Operator only)
Step 1 Log in to the IoT platform with the user name and password specied.
Step 2 After login, click Assets. Click Name of the gateway for which Discovery Mode to
be enabled.
Step 3 On the Details page, select ON for Discovery Mode.
To congure the gateway to work in remove mode, perform the following steps:
6. Setting the Gateway in Remove Mode(Operator only)
Step 1 Log in to the IoT platform with the user name and password specied.
Step 2 After login, click Assets. Click Name of the gateway for which remove mode to be
enabled.
Step 3 On the Details page, click to enable editing mode. Then click to enable the
gateway to work in remove mode.
10