22
To connect devices to the CPE, do as follows:
1. Connect the CPE to the power.
Connect the AC outlet of the power adapter to the POWER port of the CPE.
2. Connect other devices to the CPE.
Connect LAN devices, such as computers or switches, to the LAN ports of the CPE by
using cables.
Connect telephones or faxes to the TEL ports of the CPE by using telephone lines.
3. Start the CPE.
Press the POWER button to start the CPE.
After the CPE is started, you can modulate the position and direction of the CPE to
catch the strongest wireless signals. The strength of wireless signals is shown in
the five-bar signal indicator.
To Next Page
Loading...
