Huawei LTE CPE B593 - Default IP and Login Procedure

25
By default, the IP address of the CPE is 192.168.1.1 and the subnet mask is
255.255.255.0. If the CPE is working as a router, it is recommended that the IP
address and DNS settings be obtained automatically.
3. Run the Internet Explorer, enter http://192.168.1.1 in the address bar and press Enter.
4. Enter the password in the login window that opens, and then select Log In. After the
password is verified, you can perform operations on the Web-Based Utility.
For More Information
For information about more settings and configuration, you can access the Web-Based
Utility and select to refer to the online help.
To read the online help, you need to install the Adobe Reader 6.0 to later versions.