• Touch the capsule at the top of the screen, touch in the Live view.
In Desktop mode, if you go to > to exit wireless projection, Desktop mode will
be enabled by default for the next projection.
Project the Current App to a Large-screen Device
You can project the current app on your phone to a large-screen device (for example, a
Huawei Vision), while continuing to use and browse other apps on your phone.
App projection is supported on large-screen devices that support the Cast+/Miracast
protocol.
The gures are for reference only.
To project an app, perform the following steps:
• If projection is not enabled and you wish to project the current video to a large-screen
device, turn on the large-screen device, swipe down from the upper right corner of the
phone screen to display Control Panel, and touch Wireless Projection to project the app
to the large-screen device.
• If projection is enabled, open the app you wish to project on your phone, touch the
capsule at the top of the screen, and follow the onscreen instructions in the Live view, to
project the app to the large-screen device.
Once the projection is successful, the projected app will be minimized and appear as a
oating window on the phone screen. Touch to minimize the oating window to a
oating bubble.
Settings
116
To Next Page
Loading...
