Disable Always On Display
Go to Settings > Home screen & style > Always On Display, touch in the upper right
corner, and disable Always On Display.
Charging
Wireless Reverse Charging
Wireless reverse charging allows your device to charge other devices that support this
feature, including phones, tablets, watches, and bands.
1 Go to Settings > Battery (or Optimizer >
) and enable Wireless reverse charging.
2 Power on the device to be charged and place it on the center of the back of your phone.
Do not place any metal objects between your phone and the device to be charged.
3 If the device does not start charging within a few seconds, adjust its position and try
again.
Charge in Turbo charging Mode
Enable Turbo charging to give your phone a quick boost when you need it most.
1 Go to Settings > Apps & services, touch Optimizer in APP Settings, and make sure that
Smart tune-up is enabled.
2 Remember to charge your phone using the standard charger and data cable that came
with it.
3 You can enable Turbo charging in any of the following ways:
• Before the charging animation
eects disappear, when Touch & hold the center of
the screen to Turbo charge displays at the top of the screen, touch and hold down on
the center of the screen, until your phone vibrates and Turbo charging displays.
• Unlock the screen, swipe down from the upper left edge of the screen to display
Notication Panel, and touch Turbo charge in the Turbo charge message box.
If you wish to disable Turbo charging mode, touch Stop Turbo charging in the Turbo
charge message box on Notication Panel, or remove and re-insert the data cable. If you
select Ignore, the Turbo charge message box will appear after your phone has restarted.
When your phone is charging in Turbo charging mode, its temperature may increase
slightly. This is normal and does not indicate any issue with your device.
Essentials
46
To Next Page
Loading...
