Huawei Mate X6 - Biometrics & Password

Set the Status Bar to Simple Display
Go to Settings > Notications & status bar > Status bar, and enable Simple display. After
doing so, only the following frequently-used icons will display on the phone status bar by
default: time, Wi-Fi network, mobile signal, and battery level.
Biometrics & Password
Set Fingerprints
You can enroll a
ngerprint and then use it to unlock the screen and access your Safe, App
Lock, and more.
Add a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID, and follow the onscreen
instructions to set or enter the lock screen password.
2 Touch New
ngerprint to begin enrolling your ngerprint.
3 Place your ngertip on the ngerprint sensor. Adjust the position of your nger slightly
each time that you feel a vibration.
4 Once enrollment is complete, touch OK.
You'll then be able to unlock the screen whenever you place that nger on the ngerprint
sensor.
Rename or Delete a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID or Settings > Biometrics &
password > Fingerprint ID > Fingerprint management(depending on your device
model) and enter your lock screen password.
2 In the Fingerprint list section, touch an enrolled
ngerprint to rename or delete it.
Fingerprint
Identication
Fingerprint identication allows you to match your ngers with the enrolled ngerprints.
1 Go to Settings > Biometrics & password > Fingerprint ID or Settings > Biometrics &
password > Fingerprint ID > Fingerprint management(depending on your device
model) and enter the lock screen password.
2 In the Fingerprint list section, touch Identify ngerprint.
3 Touch the ngerprint sensor with your nger. The recognized ngerprint will be
highlighted.
Use Your Fingerprint to Access a Locked App
1 Go to Settings > Biometrics & password > Fingerprint ID or Settings > Biometrics &
password > Fingerprint ID > Fingerprint management(depending on your device
model) and enter the lock screen password.
Settings
129