Huawei NE40E-M2 Series - Page 122

7 Boards
Issue ()
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
120
Panel
Table 7-141 Indicators
Indicator
Status Description
STAT
Status indicator
Green:

If the indicator is steady on, the PIC is working properly.
Red:

If the indicator is steady on, the hardware on the PIC is faulty.
Yellow:

If the indicator is steady on, the PIC is installed in a slot for a
HIC and an alarm is reported or the PIC is not loaded with the
logic.
If the indicator is off, the PIC is powered off or is not registered.
L/A(0-1)
Running status indicator
Green:

If the indicator is steady on, the link is normal.

If the indicator is off, the link is Down.

If the indicator blinks, data is being transmitted.
Table 7-142 Service interfaces
Interface
Name
Interfac
e Type
Connec
tor
Type
Description
Cable
OUT0 IN0
OUT1 IN1
10GE
SFP+
Interfaces for
2-channel
SFP+ optical
signal input and
output
LC optical fiber
Functional Specifications
Features and
Functions
Remarks
Basic function
2-port 10GBase LAN/WAN-SFP+ physical interface card (PIC),
supporting optical signal input and output of two 10GE interfaces.
Reliability and
availability
Support for hot swap.
Restrictions and
Remarks
The board does not support the OTN mode or FEC function. If a
colored optical module is used and does not support optical amplifier