EasyManua.ls Logo

Huawei NetEngine 8000 M1C

Huawei NetEngine 8000 M1C
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
(IEC 19-inch & ETSI 21-inch Cabinet)
1 U Quick Installation Guide
This document applies to the installation of the ATN 910C-K/M/G,
ATN 910D-A, NetEngine 8000 M1A/M1C, and OptiX PTN 916-F.
Issue01
Question and Answer IconNeed help?

Do you have a question about the Huawei NetEngine 8000 M1C and is the answer not in the manual?

Huawei NetEngine 8000 M1C Specifications

General IconGeneral
Product TypeNetwork Router
ModelNetEngine 8000 M1C
SeriesNetEngine 8000
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Operating Humidity5% to 95% (non-condensing)
Storage Humidity5% to 95% (non-condensing)
MTBF200, 000 hours
Reliability99.999%
Power Supply VoltageAC: 100 V to 240 V, 50/60 Hz; DC: -48 V to -60 V
Forwarding Performance2 Tbps
MAC Address Table65536

Summary

Safety Guidelines

Operator Qualifications

Details on who is qualified to install and operate the equipment.

General Safety Precautions

Covers DANGER, WARNING, and NOTICE advisories for safe operation.

ESD Protection Measures

Guidelines for preventing electrostatic discharge damage to equipment.

Site Requirements

Environmental Conditions

Requirements for clean, dry, ventilated rooms and protection from corrosive gases.

Cabinet Requirements

Installing a Device

Installing in an IEC 19-Inch Cabinet

Step-by-step guide for mounting devices in a 19-inch cabinet, starting with floating nuts.

Connecting Cables

Checking the Installation

Related product manuals