Huawei NE40E-M2 Series - Page 149

7 Boards
Issue ()
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
147
Indicator
Status Description
L/A(0-1)
Running status indicator
Green:

If the indicator is steady on, the link is normal.

If the indicator is off, the link is Down.

If the indicator blinks, data is being transmitted.
Table 7-201 Service interfaces
Interface
Name
Interfac
e Type
Connec
tor
Type
Description
Cable
OUT0
IN0-OUT1
IN1
10GE
SFP+
Interfaces for
2-channel
SFP+ optical
signal input and
output
LC optical fiber
Functional Specifications
Features and
Functions
Remarks
Basic function
2-port 10GBase LAN/WAN-SFP+ physical interface card (PIC),
supporting optical signal input and output of two 10GE interfaces.
Reliability and
availability
Support for hot swap.
Restrictions and
Remarks
The board does not support the OTN mode or FEC function. If a
colored optical module is used and does not support optical amplifier
insertion, the board supports only point-to-point optical transmission.
Technical Specifications
Table 7-202 Interface specifications
Attribute
Description
Optical type supported

8.14 10Gbps SFP+ Optical Module

8.15 10Gbps SFP+ CWDM Optical Module

8.16 10Gbps SFP+ BIDI Optical Module

8.17 10Gbps SFP+ DWDM Optical Module
Working mode
Full-duplex