Huawei NE40E-M2 Series - Page 17

4 Chassis
Issue ()
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
5. ESD jack
6. Cable tray
7. Power supply module
-
Slot Layout
Figure 4-5 Slot layout
Table 4-2 Description of slot layout
Slot Name
Slot Quantity
Slot ID
Remarks
Slots for PICs
2
1 and 2
including
high-speed,
low-speed cards and
other PICs that
support hot swap
Fixed interfaces
1
3
-
Slot for PSUs
2
4 and 5
-
Slot for fans
1
6
-
Fixed Interface Board
Table 4-3 Buttons
Button
Description
RESET
This button is used to reset the MPU. Press and hold the button for 3
seconds or longer, the board is reset, and the SYS-STAT indicator
keeps blinking.
Table 4-4 Indicators
Indicator
Status Description
SYS-STAT
If this indicator is steady green, the board is working properly.
If this indicator is steady red, the hardware on the board is faulty.
If this indicator is off, the board is not powered on or not registered.