Need help?Do you have a question about the Huawei NetCol8000-A045U and is the answer not in the manual?
General| Model | NetCol8000-A045U |
|---|---|
| Cooling Capacity | 45 kW |
| Application | Data Center |
| Refrigerant | R410A |
| IP Rating | IP20 |
| Power Supply | 380-415V/3PH/50Hz |
| Compressor Type | Scroll |
| Dimensions (W x D x H) | 600 x 800 x 2000 mm |
| Sound Pressure Level | 65 dB(A) |
Provides fundamental safety instructions for installing, operating, and maintaining the equipment.
Covers critical safety measures related to grounding, power supply, and cabling.
Covers essential requirements for installing the system correctly.
Specifies requirements for the proper installation of indoor units.
Outlines necessary requirements for installing outdoor units correctly.
Provides a step-by-step guide for installing the indoor unit.
Provides instructions for installing the outdoor unit.
Provides instructions for installing the water cooling module.
Provides instructions and notices for connecting pipelines.
Details precautions and procedures for welding indoor unit pipes.
Provides instructions for performing a leakage test using nitrogen.
Instructions for connecting various cables to the unit.
Instructions for connecting power cables to the indoor and outdoor units.
Step-by-step guide for connecting power cables to the indoor unit.
Details how to connect the power cable for the outdoor unit.
Instructions for connecting signal cables.
Guides on connecting signal cables between indoor and outdoor units.
Outlines procedures for verifying correct installation.
Checklist for verifying indoor unit installation.
Checklist for verifying outdoor unit installation.
Guide to the commissioning process after installation.
Covers vacuumizing and precharging refrigerant for the system.
Details the correct amounts of refrigerant and oil required.
Step-by-step guide for vacuumizing the cooling system.
Instructions for precharging refrigerant into the system.
Steps to prepare the system before powering it on.
Procedures for powering on the smart cooling product.
Steps for initial configuration of the system.
Optional steps for configuring teamwork parameters between units.
Configuration steps for various communication parameters.
Procedures for starting up the smart cooling product.
Instructions for charging the remaining refrigerant.
Guide to using the wizard for system startup and commissioning.
Information on accessing and using the WebUI.
Steps for preparing and logging into the WebUI.
Covers routine operations and maintenance tasks for the product.
Details routine maintenance procedures for the indoor unit.
Routine maintenance procedures for the outdoor unit.
Routine maintenance procedures for the water cooling module.
Guide to diagnosing and resolving common issues.
Reference guide for system alarms, their causes, and solutions.
Procedures for replacing various parts of the system.
Step-by-step guide for replacing the air filter.
Procedure for replacing the differential pressure switch.
Guide for replacing the drive component.
Instructions for replacing fan drives on specific models.
Steps for replacing an electric heater.
Detailed guide for replacing the compressor.
Steps for replacing the filter dryer component.
Instructions for replacing the indoor fan.
Guide for replacing the outdoor fan.
Procedure for replacing the display module.
Guides on importing and exporting configuration files.
Instructions for setting LAN parameters.
Covers operations performed via the WebUI.
Guide to managing WebUI user accounts.
Procedure for exporting and importing configuration files.
Guidance on handling active alarms.
Procedure for changing user passwords.
Guide to setting alarm thresholds and parameters.
Steps for commissioning individual system components.
To Next Page
