Figure 4-99 Connecting a cable to the water sensor 2 (for NetCol8000-A060U)
----End
4.11.3.3 (Optional) Installing a Micro Dierential Pressure Sensor
Prerequisites
If a micro dierential pressure sensor is congured, perform the following steps to
install it.
Procedure
Step 1 Secure the
dierential pressure sensor inside the cabinet using two M3 screws.
NetCol8000-A(045, 055, 060, 090, 120) In-room Air
Cooled Smart Cooling Product
User Manual 4 System Installation
Issue 05 (2020-10-10) Copyright © Huawei Technologies Co., Ltd. 133
To Next Page
Loading...
