Huawei OptiX RTN 600 ODU - Figure 1-5 Interfaces of the ODU with the Coaxial Interface; Table 1-2 ODU Interface Description

Figure 1-5 Interfaces of the ODU with the coaxial interface
Grounding
bolt
Antenna
interface
RSSI
interface
IF interface
Table 1-2 ODU interface description
Interface Function Type of Connector
Antenna interface
a
Connects the antenna or the
hybrid coupler.
Type-N, female (6 GHz
frequency band)
1.025" dia (7/8 GHz
frequency band)
153IEC-R100 (10/10.5 GHz
frequency band)
153IEC-R120 (11/13 GHz
frequency band)
153IEC-R140 (15 GHz
frequency band)
153IEC-R220 (18/23/26
GHz frequency band)
153IEC-R320 (28/32 GHz
frequency band)
0.219" dia (38 GHz
frequency band)
IF interface
Connects the IF cable. Type-N (female)
RSSI interface Connects the multimeter
during the RSSI test.
BNC (female)
Grounding bolt Connects the protection
ground cable.
5 mm bolt
NOTE
a: The coaxial interface of an ODU must be connected to the antenna or hybrid coupler through an RF cable.
1 ODU
OptiX RTN 600 ODU
Hardware Description
1-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 06 (2010-05-30)