Huawei OptiX RTN 600 ODU - 3 Separate Mount Parts; About This Chapter; 3.1 Separate Mount Parts for an ODU with the Waveguide Interface; 3.2 Separate Mount Parts for an ODU with the Coaxial Interface

3 Separate Mount Parts
About This Chapter
When an ODU applies the separate mount mode, you need to use separate mount parts to connect
an antenna to the ODU or hybrid coupler. The separate mount parts described in this documents
are the separate mount parts applicable to the OptiX RTN 600 SP/SPA/HP/LP/LPA ODU.
3.1 Separate Mount Parts for an ODU with the Waveguide Interface
When an ODU with the waveguide interface adopts the separate mount mode, the installation
parts include an ODU adapter and a flexible waveguide.
3.2 Separate Mount Parts for an ODU with the Coaxial Interface
When an ODU with the coaxial interface adopts the separate mount mode, the installation parts
include a waveguide-to-coaxial converter and an RF cable.
OptiX RTN 600 ODU
Hardware Description 3 Separate Mount Parts
Issue 06 (2010-05-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-1