Transfer Data Between Your Phone and a USB Device
USB OTG (USB On-The-Go) lets you transfer data directly between your Phone and other devices (such
as phones, tablets, cameras, and printers) without requiring a computer. You can also use an USB OTG
cable to connect your Phone directly to a USB storage device and transfer les.
Transfer data between your Phone and a USB storage device
You can use an OTG cable to access USB storage devices (including USB drives and card readers)
directly from your Phone.
l This feature is only available on Phones with USB OTG support.
l If your Phone has a USB Type-C port, you will need to buy a
Huawei-certied Micro USB to USB
Type-C adapter or a USB OTG cable with a USB Type-C connector.
1 Connect the USB drive to your Phone using a USB OTG cable.
2 Go to Files > Local > USB drive, navigate to the USB drive, select the data that you want to copy,
and then copy it to the target folder.
3 Once the transfer is complete, go to Settings > Storage > USB drive > Eject.
4 Disconnect the USB OTG cable and USB cable from the two devices.
Device Connection
101
To Next Page
Loading...
