Huawei PowerCube 500 - Preface; Purpose; Intended Audience; Symbol Conventions

3
4
Installing a Camera and Cables
Installing a Camera
4.1
For the camera installation method, see the documents delivered with the equipment.
Installing Camera Cables
4.2
For the cable connections at the camera side, see the documents delivered with the equipment. Reserve the other ends of cables.
5
Installing PV Modules and Cables
Installing a PV Module Support
5.1
In the northern hemisphere, PV modules face south. In the southern hemisphere, PV modules face north.
1. Remove the connective kit. 2. Adjust the PV module direction based on
the PV module direction principles, and
then install the connective kit.
3. Adjust the PV module tilt angle based on the site
latitude, and secure the PV module support base.
Site
Latitude
(Degree)
PV Module
Tilt Angle
0
–15
15
°
16
–25
25
°
26
–30
35
°
31
–45
45
°
When installing beams,
keep the slots on the
beams face outwards to
facilitate operation.
4. Install the PV module support. 5. Measure the PV module
hole spacing L.
6. Determine the beam mounting holes based on L
and install the beams.
NOTICE
NOTE