Huawei SmartLi-512V-80AH-F User Manual

1
Issue: 06
Part Number: 31500BED
Date: 2020-03-13
SmartLi Quick Guide
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
1
Overview
Model Capacity Weight
Dimensions (H x W x D) Configuration type
SmartLi-512V-80AH-F
80 Ah
< 750
kg
2000 mm x 600 mm x 850
mm
With an LCD
SmartLi-512V-80AH-S
Without an LCD
Battery circuit breaker
Monitoring module
Battery control unit
End pressure gauge
Battery module
Fuse
MDU
Auxiliary
wrench
Fuse
Fire-trace
tube
Fire
cylinder
Front View
Rear
View
1. Before installation, read the user manual carefully to get familiar with product information and
safety precautions.
2. Use insulated tools during installation and operation.
3. Only Huawei engineers or engineers certified by Huawei are allowed to install, commission, and
maintain the battery cabinet. Otherwise, personal injury or equipment damage may occur, and
the resulting battery cabinet faults are beyond the warranty scope of Huawei.
4. This document describes how to install a single battery cabinet. For details about how to install
parallel systems, contact Huawei technical support.

Huawei SmartLi-512V-80AH-F Specifications

General

Model	SmartLi-512V-80AH-F
Type	Lithium-Ion Battery
Module Type	Rack-mounted
Nominal Voltage	512 V
Nominal Capacity	80 Ah
Energy	40.96 kWh
Communication Interface	RS485, CAN
Cooling Method	Natural cooling
Protection Level	IP20

Summary

1 Overview

2 Installing a Fire Cylinder

3 Installing a Cabinet

3.1 Secured Installation

Details the process of physically securing the cabinet to the floor using expansion bolts and drilling.

3.2 Non-Secured Installation

Explains how to level the cabinet using its adjustable feet when secured installation is not required.

4.1 Cable Connection Reference

4.2 Installing a Ground Cable

4.3 Installing Battery Modules and Cables

4.4 Installing Output Cables

4.5 Combining Cabinets

5 Verifying the Installation

6 Powering On

7 Powering Off