To Next PageTo Next Page
Need help?Do you have a question about the Huawei UPS5000-E300K-SM and is the answer not in the manual?
General| Model | UPS5000-E300K-SM |
|---|---|
| Category | UPS |
| Rated Capacity | 300 kVA |
| Output Frequency | 50/60 Hz |
| Efficiency (AC-AC) | ≥ 96% |
| Parallel Capability | Up to 8 units |
| Topology | Double Conversion Online |
| Input Voltage | 380/400/415 VAC |
| Output Voltage | 380/400/415 VAC |
| Battery Type | Lithium-ion |
| Operating Temperature | 0°C to 40°C |
| Humidity | 0% to 95% (non-condensing) |
| Communication Interface | RS485, SNMP, Dry contact |
Detailed steps for securing the UPS cabinet to the floor for stable installation.
Instructions for leveling the UPS cabinet using its feet without securing it to the floor.
General guidelines and warnings for connecting cables to the UPS system.
Step-by-step guide for connecting power and ground cables for the UPS5000-E-300K-SM.
Step-by-step guide for connecting power and ground cables for the UPS5000-E-300K-SMT.
Procedure for powering on the UPS and initiating the startup process.
Steps for obtaining startup password and performing the initial configuration via Service Expert app.
Instructions on how to start the UPS inverter through the main menu and login.
Steps to supply power to the connected loads after the UPS inverter starts.
Optional configuration for BCB box parameters within the Settings > Dry Contact Set menu.
Procedure to shut down the inverter and transfer the UPS operation to bypass mode.
Steps to completely power off a single UPS unit by opening input and output switches.
