3
1
Introduction to Interfaces
Introduction to the Chassis
2
Introduction to Installation Holes on Both Sides of the Chassis
Extended network interface
PGND point (19-
inch cabinet)
Power interface
GE Optical interface
Clock and time interface
FE Optical interface
Antistatic jack interface
E1 interface
NM interface
Ethernet service interface
Installation holes for
N63E/19-inch cabinet
The PTN 950 is available in two models: common chassis and extended chassis, which are 2 U and 3 U
high, respectively. Installation modes of the two types of chassis are basically the same; therefore, the
common chassis is used as an example to describe the installation of the PTN 950 in this document. For
information about the installation of the extended chassis, refer to the Appendix.
To Next Page
Loading...
