l Connect the backup power cable.
NOTE
Only the S5700-24TP-SI-AC, S5700-24TP-SI-DC, S5700-48TP-SI-AC, and S5700-48TP-SI-DC
switches support external backup power supplies.
Connecting Signal Cables
CAUTION
l Do not look into the optical port without eye protection.
l The power cables must be more than 10 cm away from signal cables.
When a large number of cables need to be connected, arrange the cables in the cabinet, and then
install cable connectors.
NOTE
The following figure is only for reference. Cables must be arranged based on conditions of the chassis and
cards installed.
S2700&S3700&S5700&S6700 Series Ethernet Switches
Quick Start Guide
2 Device Installation
Issue 12 (2013-07-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
26
To Next Page
Loading...
