Symbol Description
Calls attention to important information,
best practices and tips.
NOTE is used to address information not
related to personal injury, equipment
damage, and environment deterioration.
Command Conventions
The command conventions that may be found in this document are defined as follows.
Convention
Description
Boldface The keywords of a command line are in boldface.
Italic Command arguments are in italics.
[ ] Items (keywords or arguments) in brackets [ ] are optional.
{ x | y | ... } Optional items are grouped in braces and separated by
vertical bars. One item is selected.
[ x | y | ... ] Optional items are grouped in brackets and separated by
vertical bars. One item is selected or no item is selected.
{ x | y | ... }
*
Optional items are grouped in braces and separated by
vertical bars. A minimum of one item or a maximum of all
items can be selected.
[ x | y | ... ]
*
Optional items are grouped in brackets and separated by
vertical bars. Several items or no item can be selected.
&<1-n> The parameter before the & sign can be repeated 1 to n
times.
# A line starting with the # sign is comments.
Disclaimer
This document is designed as a reference for you to configure your devices. Its contents,
including web pages, command line input and output, are based on laboratory conditions. It
provides instructions for general scenarios, but does not cover all use cases of all product
models. The examples given may differ from your use case due to differences in software
versions, models, and configuration files. When configuring your advice, alter the
configuration depending on your use case.
The specifications provided in this document are tested in lab environment (for example, the
tested device has been installed with a certain type of boards or only one protocol is run on
S5700 Series Ethernet Switches
Hardware Description
About This Document
Issue 24 (2016-08-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii
To Next Page
Loading...
Need help?
General
