The inner VLAN tag identifies the user. Note that the inner VLAN tag must be unique in one
ISP domain, and the inner VLAN tags can be the same in different ISP domains.
huawei(config)#stacking label service-port 0 11
huawei(config)#stacking label service-port 1 12
huawei(config)#stacking label service-port 2 11
huawei(config)#stacking label service-port 3 12
Step 8 Save the data.
huawei(config)#save
----End
Result
l After passing the authentication by the ISP1 BRAS, enterprise 1 and enterprise 2 can obtain
the service provided by ISP1.
l After passing the authentication by the ISP2 BRAS, enterprise 3 and enterprise 4 can obtain
the service provided by ISP2.
Configuration File
vlan 60-61 smart
It will take several minutes, and console may be timeout, please use command
idle-timeout to set time limit
Are you sure to add VLANs? (y/n)[n]:y
The total of the VLANs having been processed is 2
The total of the added VLANs is 2
vlan attrib 60-61 stacking
It will take several minutes, and console may be timeout, please use command
idle-timeout to set time limit
Are you sure to continue? (y/n)[n]:y
The total of the VLANs having been processed is 2
The total of the VLAN(s) which have been operated successfully is 2
port vlan 60-61 0/19 0
It will take several minutes, and console may be timeout, please use command
idle-timeout to set time limit
Are you sure to add standard port(s)? (y/n)[n]:y
The total of the VLANs having been processed is 2
The total of the port VLAN(s) having been added is 2
traffic table ip index 100 cir 2048 priority user-cos 4 priority-policy local-
Setting
service-port 0 vlan 60 adsl 0/2/0 vpi 0 vci 35 rx-cttr 10 tx-cttr 10
service-port 1 vlan 60 adsl 0/2/1 vpi 0 vci 35 rx-cttr 10 tx-cttr 10
service-port 2 vlan 61 adsl 0/3/0 vpi 0 vci 35 rx-cttr 10 tx-cttr 10
service-port 3 vlan 61 adsl 0/3/0 vpi 0 vci 35 rx-cttr 10 tx-cttr 10
stacking label service-port 0 11
stacking label service-port 1 12
stacking label service-port 2 11
stacking label service-port 3 12
save
4.3 Configuration Example of the PWE3 Private Line Service
This topic describes how to configure the MPLS PWE3 private line service using examples.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
4 Configuration Example of the Private Line Service
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
398
To Next Page
Loading...
Need help?
General
