be     
neglected                   
>  Do you want to name the profile (y/n) 
[n]:n                                  
>  Data path mode 1-ATM, 2-PTM, 3-Both (1~3) [3]:
1                              
>  Will you set the minimum impulse noise protection? (y/n) 
[n]:y               
>    Minimum impulse noise protection 
downstream:                               
>    1-noProtection    2-halfSymbol      3-singleSymbol     4-
twoSymbols        
>    5-threeSymbols    6-fourSymbols     7-fiveSymbols      8-
sixSymbols        
>    9-sevenSymbols    10-eightSymbols   11-nineSymbols     12-
tenSymbols       
>    13-elevenSymbols  14-twelveSymbols  15-thirteenSymbols 16-
fourteenSymbols  
>    17-fifteenSymbols 18-
sixteenSymbols                                        
>    Please select (1~18) [2]:
4                                                 
>    Minimum impulse noise protection 
upstream:                                 
>    1-noProtection    2-halfSymbol      3-singleSymbol     4-
twoSymbols        
>    5-threeSymbols    6-fourSymbols     7-fiveSymbols      8-
sixSymbols        
>    9-sevenSymbols    10-eightSymbols   11-nineSymbols     12-
tenSymbols       
>    13-elevenSymbols  14-twelveSymbols  15-thirteenSymbols 16-
fourteenSymbols  
>    17-fifteenSymbols 18-
sixteenSymbols                                        
>    Please select (1~18) [2]:
4                                                 
>  Will you set interleaving delay parameters? (y/n) 
[n]:y                      
>    Maximum interleaving delay downstream (0~63 ms) [16]:
24                    
>    Maximum interleaving delay upstream (0~63 ms) [6]:
12                       
>  Will you set parameters for rate? (y/n) 
[n]:y                                
>    Minimum transmit rate downstream (32~32000 Kbps) 
[32]:                     
>    Minimum reserved transmit rate downstream (32~32000 Kbps) 
[32]:            
>    Maximum transmit rate downstream (32~32000 Kbps) [24544]:
8000              
>    Minimum transmit rate upstream (32~6000 Kbps) 
[32]:                        
>    Minimum reserved transmit rate upstream (32~6000 Kbps) 
[32]:               
>    Maximum transmit rate upstream (32~6000 Kbps) 
[1024]:                      
>  Will you set rate thresholds? (y/n) 
[n]:                                     
>  Will you set retransmission function (y/n) 
[n]:                              
>  Will you set erasure decoding? (y/n) [n]: 
  Add profile 10 successfully
3. Configure the ADSL2+ line template.
The configured ADSL2+ line profile and the ADSL2+ channel profile are bound together
in the ADSL2+ line template and the index of the ADSL2+ line template is 10.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
5 Configuration Example of MSTP Subtending Network
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
476