1                              
>  Will you set the minimum impulse noise protection? (y/n) 
[n]:y               
>    Minimum impulse noise protection 
downstream:                               
>    1-noProtection    2-halfSymbol      3-singleSymbol     4-
twoSymbols        
>    5-threeSymbols    6-fourSymbols     7-fiveSymbols      8-
sixSymbols        
>    9-sevenSymbols    10-eightSymbols   11-nineSymbols     12-
tenSymbols       
>    13-elevenSymbols  14-twelveSymbols  15-thirteenSymbols 16-
fourteenSymbols  
>    17-fifteenSymbols 18-
sixteenSymbols                                        
>    Please select (1~18) [1]:
3                                                 
>    Minimum impulse noise protection 
upstream:                                 
>    1-noProtection    2-halfSymbol      3-singleSymbol     4-
twoSymbols        
>    5-threeSymbols    6-fourSymbols     7-fiveSymbols      8-
sixSymbols        
>    9-sevenSymbols    10-eightSymbols   11-nineSymbols     12-
tenSymbols       
>    13-elevenSymbols  14-twelveSymbols  15-thirteenSymbols 16-
fourteenSymbols  
>    17-fifteenSymbols 18-
sixteenSymbols                                        
>    Please select (1~18) [1]:
3                                                 
>  Will you set interleaving delay parameters? (y/n) 
[n]:y                      
>    Maximum interleaving delay downstream (0~200 ms) 
[20]:                     
>    Maximum interleaving delay upstream (0~200 ms) 
[20]:                       
>  Will you set parameters for rate? (y/n) 
[n]:y                                
>    Minimum transmit rate downstream (64~100000 Kbps) 
[64]:                    
>    Minimum reserved transmit rate downstream (64~100000 Kbps) 
[64]:           
>    Maximum transmit rate downstream (64~100000 Kbps) 
[100000]:                
>    Minimum transmit rate upstream (64~100000 Kbps) 
[64]:                      
>    Minimum reserved transmit rate upstream (64~100000 Kbps) 
[64]:             
>    Maximum transmit rate upstream (64~100000 Kbps) 
[100000]:                  
>  Will you set rate thresholds? (y/n) 
[n]:                                     
>  Will you set retransmission function (y/n) 
[n]:                              
>  Will you set erasure decoding? (y/n) 
[n]:                                    
>  Will you set SOS bit rate (y/n) [n]: 
  Add profile 10 successfully 
3. Configure the VDSL2 line template.
Bind the preceding configured line profile and the channel profile together in the line
template with the index of 10.
huawei(config)#vdsl line-template add 10 
  Start adding template     
  Press 'Q' to quit the current configuration and new configuration will be 
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
5 Configuration Example of MSTP Subtending Network
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
485