Figure 4-7 Installing an Inverter
Step 3 (Optional) Install the locking screw for the DC switch.
Figure 4-8 Installing the locking screw for the DC switch
----End
4.6 (Optional) Installing a Junction Box
If you do not connect cables immediately after securing the inverter, install a
junction box. Otherwise, the protection level of the inverter will be aected.
Step 1 Align the pin holes at both ends of the junction box with the positioning pins on
the inverter enclosure to ensure that the screw holes on the junction box are
aligned.
SUN2000-(12KTL-25KTL)-M5 Series
User Manual 4 Installation
Issue 03 (2023-02-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 29
To Next Page
Loading...
