Huawei SUN2000-15KTL-50KTL-M3 Series - Page 30

Replacing SUN2000-(15KTL-50KTL) Series with
SUN2000-(15KTL-50KTL)-M3 Series
User Manual
4 Removing the Original SUN2000
Issue 01 (2021-04-05)
Copyright © Huawei Technologies Co., Ltd.
23
Figure 4-11 Removing the AC terminal cover
Step 4 Remove the AC power cable. The SUN2000-40KTL is used as an example.
Figure 4-12 Removing the AC power cable

If the AC terminal of the original inverter is a 3-pin terminal, use an M8 torque wrench to remove
the terminal.

If the AC terminal of the original inverter is a 4-pin terminal, use an M6 torque wrench to remove
the terminal.
Step 5 Remove the DC connectors.