Replacing SUN2000-(15KTL-50KTL) Series with
SUN2000-(15KTL-50KTL)-M3 Series
User Manual
Copyright © Huawei Technologies Co., Ltd.
Figure 5-20 Installing the locking screw for the DC switch
Step 2 Align the mounting holes and install the mounting bracket.
Figure 5-21 Installing the mounting bracket
When installing the mounting bracket, select mounting holes based on the original cable length to
adjust the mounting bracket height. The AC power cable length requirements should be
preferentially met.
The mounting bracket and AC adapter box are not delivered with the SUN2000.
The mounting holes of the engineering mounting kits must be identical to the original one. The
mounting holes can be directly aligned with those on the support. However, if you install the
mounting bracket on a wall, you need to make new holes.
Step 3 Install the SUN2000 onto the mounting bracket.
To Next Page
Loading...
