Huawei SUN2000-175KTL-H0 - Replacing a Fan

Item Check Method Maintenance
Interval
Clear vegetation
around the
inverters
● Perform inspection and weeding
as required.
● Clean the site promptly after
weeding.
Based on the local
wilting season
Removing the bae of the air intake vent
Figure 8-2 Removing the bae
8.4 Replacing a Fan
CA UTION
● Before replacing a fan, power o the inverter.
● When replacing a fan, use insulation tools and wear personal protective
devices.
NO TE
If the fan tray gets stuck when being pulled or pushed, slightly lift it.
Step 1 Remove the screw on the fan tray and save it. Pull out the fan tray until the fan
bae plate aligns with the inverter chassis.
Figure 8-3 Pulling out fan tray (1)
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1)
User Manual 8 Maintenance
Issue 19 (2023-12-20) Copyright © Huawei Technologies Co., Ltd. 95